Pentax IQZoom - Page 7

1. Battery check
As you turn the main switch on, the lens slightly
extends, and the lens protector opens. If they
do not, the battery is exhausted, or it is not
properly loaded.
Do not remove the battery from the carh-
era which is operating; otherwise it may
malfunction.
2
2. Battery replacement
If the battery mark in the LCD window Is lit up
while you are operating the main switch, the zoom
lever, or the shutter-release button, the battery
is becoming exhausted, and it should be replaced
with a new one. When the battery power is getting
low, reaching the limit of use, the battery mark is
lit up, then flickers, and the shutter cannot be
released. When the battery is completely exhausted
the battery mark does not even appear.
3