Pentax IQZoom - Camera Controls and Displays; Main Switch and LCD Indicators; Macro Focus Functionality; Important Operational Cautions

V^am switch and LCD window's displays
STi9 .
j* il:
O '—
„ i?5a»j
0 H IM : - i
O Main switch; To operate the camera, turn this
switch on by setting it as shown above.
O MacroTocus-set button; When shooting in the
macro mode, align the main switch with the
jCr mark while pushing this macro-focus-set
button.
O Battery mark; This mark lights up when the
battery gets weak,
O Cartridge mark: When film is loaded into the
camera and the back cover is closed, this mark
appears, and it also flickers when the film
rewinding is completed.
O Film-transport mark: This indicates the film
is being wound or rewound.
O Exposure counter; This indicates how many
pictures were taken.
O
o
o
o
CAUTIONS
• This camera is powered by one 6V lithium
battery (BR-P2 or DL-223A), or four "AAA^'
j size alkaline batteries. The Ni-Cd battery is
! not compatible.
• The lens protector automatically opens or
closes by turning the main switch on or off.
Do not open It manually.
• When film is not in the camera, flash does
not fire, nor does the cartridge mark appear
in the LCD window, nor does the macro
function work.
The shutter cannot be released if or when:
• the battery is not in the camera or it Is
; incorrectly inserted in the chamber, or it is
exhausted.
• the main switch is off.
• you shoot a subjct more than one meter
I (3.3 ft.) away, with the lens set in the
I macro mode.
• the lens is in the zooming action.
j • the flash is being charged, or the recycle
time becomes much longer than usual.
• the film is being rewound, and the film
j rewind has just been completed.