Pentax IQZoom - Operational Handling and Environmental Care; Temperature and Environmental Considerations; Device Handling Precautions

Switching the mode
Each time you depress the MODE button 0 with
your fingernail, the mode in the data-display
window O switches from "Year-Month-Day" to
"Month-Day-Year" to "Day-Month-Year" to "Day-
Hour-Minute" (A- or P-Hour:Minute) to "OFF."
Stop depressing the button when the desired mode
appears in the window. "OFF" indicates no data are
imprinted.
Correcting the data
• Depress the SELECT button 0 at first, and the
display will switch from any mode to
"Hour:Minute"with the mark flickering. Each
time you depress the SELECT button © , the flicker
moves from ":" to "Minute" to "Hour" to "Day"
to "Month" to "Year." Make the display you wish
to correct, flicker.
• Depress the ADJUST button O for changing
the digits of the display you wish to correct. The
digit advances one by one each time you depress
the ADJUST button O . If you keep it depressed,
the digit will, in a second or two, advance
continuously.
Correcting the second
1. Depress the SELECT button © , and will
flicker.
2. Depress the ADJUST button O according to
a time-signal, and will stop flickering
for an instant, setting the second to zero.
Correcting "Hour:Minute" and "Year-Month-Day"
1. Make any digit or digits of the hour, minute,
year, month, and day (which you wish to
correct) flicker by depressing the SELECT
button ©.
2. Set the digit or digits correctly by depressing
the ADJUST button O .
Year = 85 - 09 (1985 - 2009)
Month = 1—12
Day = 1- 31
Hour = 0-23 (A or P, 1 -12)
Minute = 00 — 59
Correcting "A," "P," and "Hour:Minute"
1. Set the display to "Day-Hour-Minute" by
depressing the MODE button 0 .
2. Keep depressing the ADJUST button O for
a few seconds, and "Day" will switch to "A"
(a.m.) or "P" (p.m.).
Example: 10 15:30->P 3:30
25