44
3
Basic Operations
3
Turn the zoom ring to
determine the size of the
subject.
Determine the size of the subject.
1 Using the Zoom Lens (p.50)
4
Position the subject inside the
AF frame and press the shutter
release button halfway.
The autofocus system operates. The
focus indicator ] appears in the
viewfinder when the subject is in focus.
The flash pops up automatically when
necessary (manually lift the flash when
Flash mode is not set to [Auto]).
1 Operating the shutter release button
(p.45)
1 Hard-to-Autofocus Subjects (p.46)
1 Using the Built-in Flash (p.51)
5
Press the shutter release
button fully.
The picture is taken.
You can preview the image in the LCD monitor and check the composition,
exposure, and focus before taking the picture. (p.147)
Focus indicator
To Next Page
Loading...
