Pentax K-01 - Flash Mode; Drive Mode

20
In standby mode, you can select the following functions by using
the four-way controller.
zFlash Mode
Select from C (Auto Flash Discharge), i (Auto Flash+Red-eye
Reduction), b (Manual Flash Discharge), D (Manual
Flash+Red-eye Reduction), G (Slow-speed Sync),
H (Slow-speed Sync+Red-eye), or I (Trailing Curtain Sync).
The flash modes that can be selected differ depending on the
capture mode.
When C or D is selected, the built-in flash pops up automatically
when necessary.
zSensitivity
Select from [ISO AUTO] or [ISO] (fixed value).
zDrive Mode
Select from 9 (Single Frame Shooting),
g (Continuous Shooting), g (Self-timer),
h (Remote Control), or l (Exposure
Bracketing).
Using the Four-way Controller
Pentax_K-01_QSG.book Page 20 Wednesday, February 8, 2012 3:07 PM