Pentax K-5 II S - Using the Shake Reduction Function to Prevent Camera Shake

en
::::r
0
0
=
::::l
(Q
"TT
s::
::::l
0
=
0
::::l
(/)
Using
the
Shake
Reduction
Function
The Shake Reduction function reduces camera shake that occurs when
the shutter
release
button is pressed.
Ideal
when taking pictures
in
the
following
situations.
•
When taking pictures
in
dimly lit
locations, such as indoors, at night,
on
cloudy
days and
in
the shade
•
When taking telephoto pictures
The Shake Reduction function can be used to reduce horizontal and
vertical camera shake or keep the image
level.
•
The Shake
Reduction function does not compensate for blurring caused
by
subject
movement.
To
take pictures of a moving subject, increase the shutter speed.
•
The Shake
Reduction function may not
fully
reduce camera shake when
taking
close-up shots.
In
this case, it is recommended to turn
off
the Shake
Reduction function and use the camera with a tripod.
•
The
Shake
Reduction function
will
not
fully
work when shooting with a very
slow
shutter speed, for
example
when panning
or
shooting night scenes.
In
this case, it is recommended to turn off the
Shake Reduction function and use
the camera with a tripod.
•
The
Shake Reduction function is
available with any PENT AX
lens
compatible
with this camera. However, be sure to set the focal length before using a
lens
for which focal length information cannot be
automatically
obtained. Refer to
"When the Focal Length Cannot Be
Automatically Detected"
(p.124) for details.
Reducing Vertical and Horizontal Camera
Shake
1
2
-----
---
- -
Select
[Shake
Reduction]
in
the
[0
Rec. Mode 4]
menu
and
press
the
four-way
controller
(
.,._
).
-
-·--
-
--
--
-
-
-
---
--
~
~~
-
Use
the
four-way
controller
(
_.
T)
to
select
(<~>)
or
*
and
press
the
OK
button.
(<~>)
Uses
Shake
Reduction.
(default
setting)
~
Does not use Shake Reduction.
Movie
Live View
Electronic
Level
Horizon
Correction
hake Reduction
Input
Focal Length
GPS
D