Pentax K-5 II S - Page 144

•
5 Use
the
four-way
controller
(A
•)
to
select
the bracketing amount
and press the
OK
button.
Select
[±1]
(default
setting), [±2], [±3] or
[±4].
For [White
Balance], select
from [BA±1]
(default
setting), [BA±2],
[BA±3], [GM±1],
[GM±2] or [GM±3].
6
Press the
MENU
button twice.
The camera returns to Capture mode.
K1>J
Press the shutter
release
button
halfway.
The autofocus system operates.
(A
:::r
0
0
:t
::J
(Q
-n
c
:::s
(')
:t
0
:::s
en
8
Press the shutter
release
button
fully.
Three images are saved.
•
Exposure Bracketing and Extended Bracketing can be used at the same
time. When used at the same time, each time the shutter
is
released for
Exposure Bracketing, three images with Extended Bracketing applied are
saved.
•
Parameters that cannot be set due to the image finishing tone setting
of
Custom
Image
also cannot be set for Extended Bracketing. (Example: When
set to [Monochrome], Saturation and Hue cannot
be
selected for Extended
Bracketing) (p.197)
•
When [Fine Sharpness] or [Extra Sharpness]
is
set for Custom
Image,
the
sharpness
of
Extended Bracketing operates as Fine Sharpness or Extra
Sharpness.
• When [Contrast] is set for Custom
Image,
the contrast
of
Extended
Bracketing operates according to the [Contrast] setting.