EasyManua.ls Logo

Pentax K-5 II S - Page 170

Pentax K-5 II S
398 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
c:
en
::s
(,Q
....
About the
Display Panel
for AF360FGZ
The
AF360FGZ
itself does not have the function to set the FORMAT
size
to
[DIGITAL].
However, when it is used with a
SLR Digital Camera, the
difference in
focal
length between a 35 mm camera and this camera is
automatically calculated
based on the difference
in
angle
of
view and is
displayed on the
panel
(when using DA, DA
L,
D FA, FA
J,
FA or F lens).
The conversion indicator appears and the
FORMAT
size indicator
disappears when the exposure metering timer
of
this camera is on (it
returns to 35
mm
format
display
when
the
exposure
metering
timer
is
turned off).
Lens Focal Length
85mm
50mm 35mm
28mm
20mm
18mm
/77mm /24mm
Exposure metering timer
85mm 70mm 50mm 35mm 28mm
24mm*
Off
Exposure metering timer
58mm 48mm 34mm 24mm
19mm
16mm*
On
*
Using wide-angle panel
:r
~
Using the P-TTL Auto Flash
Q)
en
:r
You can use the P-TTL auto
flash
with an
AF540FGZ, AF360FGZ,
AF200FG
or
AF160FC
flash unit.
The
flash pre-flashes before the actual flash and confirms the subject (the
distance, brightness, contrast, whether it
is
backlit, etc.) using the camera 77-
segment metering sensor. The
flash
output for the actual flash
is
adjusted based
on
the information obtained from the pre-flash, enabling flash photography with
more accurate exposure for the subject than with normal TTL auto.
f
Remove the cover of the hot shoe and attach the
external
flash.
2 Turn
on
the camera and the
external flash.
3 Set
the
external flash
mode
to
[P-TTL].
4
Confirm
that
the
external flash
is
fully
charged and then
take a picture.
The
~
will light
in
the viewfinder when the flash
is ready (fully
charged).

Related product manuals