•
CJ)
:::r
0
0
~
::::J
cc
CJ)
CD
....
~
::::J
cc
t.n
2
Press
the
four-way
controller
(
IJII>
)
and use the four-way
controller
( •
T)
to
select
[Off],
[Auto],
[Standard], [Strong 1], [Strong 2]
or [Strong 3].
3
Press the
OK
button.
4 Use
the
four-way
controller
(.A
'f')
to
select
[Auto
Align]
and use the four-way controller (
...._
..,.,.
) to select
o or
~.
D
[Shake
Reduction] is fixed to
Nl)
(Off). Use a tripod to prevent
camera shake
when
taking pictures.
(default
setting)
The
Shake
Reduction function operates according to the
Shake
~
Reduction setting at that point. HDR Capture can
be
used without a tripod.
[Program Line] (p.89) is fixed to
~
(Hi-speed Priority) and
[AUTO
ISO
Parameters] (p.84) is fixed
to~
(Fast).
5
Press the
MENU
button twice.
The
camera
is
ready
to
take
a
picture.
lr
~
~~
o
•
During HDR Capture, pressing the
MENU
button while
an
image
is
being
saved
cancels
the process and saves the image as a standard image.
•
When both [Shake Reduction] and [Auto
Align]
are set to on, be
careful
of
the
following points.
- Make sure to
hold
the camera
firmly
so that the composition
of
the picture
does not change
while
the three images are taken.
If
there is a great
difference
of
the composition between three images, [Auto
Align]
may not
be
possible.
-
Images
taken with HDR Capture are susceptible to camera shake and
blur.
Be sure to set a higher shutter speed and a higher
ISO
sensitivity.
- When the exposure mode
is
set to
P
(Program Automatic Exposure),
[Program Line]
is
set to
~
(Hi-speed Priority).
- When the
ISO
sensitivity is set to [ISO AUTO], the sensitivity can be raised
more easily
than
normal.
- [Auto
Align]
may not
be
possible
for
lenses
that have a
focal length
exceeding
100
mm.
- When the entire subject is checkered or has a uniform surface, [Auto
Align]
may not be
possible.
To Next Page
Loading...
