Saving the Cross Processing Setting
of
a Captured Image
The outcome
of
cross processing varies each time a picture is taken. If you
are able to take a cross processed image that you like, you can save the
Cross Processing settings used
in
that image. A total
of
3 Cross
Processing settings can be saved for still pictures and movies.
1
To save Cross Processing setting for movies, set from [Movie]
in
the
[0
Rec.
Mode 4] menu with the mode dial set to
~!!
(Movie).
Select [Save Settings]
in
Step 2 on p.200 and press the
four-way controller (
~
).
The camera will search for cross processed images starting from the
most recent image taken. (An hourglass icon is displayed while
searching.) When a cross processed image is found, the screen to save
the settings appears.
If there are no cross processed images, the message [No cross
processed image] appears.
2 Turn the
front
e-dial
(~)
to
select a cross processed image.
3 Use the
four-way
controller
(.A.
T)
to
select
a
number
and
press the OK button.
The setting
of
the selected image is saved to [Favorite 1 - 3].
4 Press the
MENU
button
twice
to
finish
saving.
•
en
:r
0
0
~
::s
cc
en
CD
Ef.
::s
cc
tA
To Next Page
Loading...
