Pentax K-5 II S - Page 306

•
4
Press
the
four-way
controller
{
.6.)
to select
[Mirror Up] and press
the
OK
button.
The mirror is
locked
in
the up position.
If
you used Dust
Alert
to detect dust on
the sensor within the
last 30
minutes, the
Dust Alert
image appears on the monitor.
Clean
the sensor while
checking the
location
of
the dust.
5
Clean
the CMOS
sensor.
Use a brush-less blower to remove dirt
and dust from the
CMOS sensor. Using a
blower
with a brush may scratch the
CMOS sensor. Do not wipe the
CMOS
sensor with a
cloth.
6
Turn off the camera.
J
Sensor
Cleaning
l
Raises
mirror
and opens shutter
for
access to
clean
sensor.
Turn the power
off
to finish
Mirror
Up
Cancel
The mirror
automatically
returns to its original
position.
J
Attach
the
lens
or
body
mount
cover.