1
Turn
the
main
switch
to
[ON).
The camera will turn on.
Set the main switch to the position [OFF]
to turn off the camera.
• Always turn the camera off when not
in
use.
c
e(@o@]
• The power will automatically turn off when you do not perform any operations
within a set period
of
time. To reactivate the camera, turn it on again or
perform any
of
the following.
- Press the shutter release button halfway.
- Press the
lE1
button, MENU button or INFO button.
• By default, the camera
is
set to turn off automatically after 1 minute
of
inactivity. You can change the setting
in
[Auto Power Off]
of
the['
Set-up
3]
menu. (p.266)
•
To Next Page
Loading...
