Pentax ME Super - Lens Mounting

LENS MOUNTING
1. Remove the rear lens and
body mount covers.
2. Match the red dot @ on the
camera body with the red dot
© on the lens. Insert the lens
into the body and turn it
clockwise
until
the
lens
locks with a click.
3. In the dark, when the red
dots are difficult to see, align
the raised white node @ on
the lens barrel with the lens
release lever (9 by touch
Then turn and lock as above.
4. To detach, hold the camera
with your left hand. Depress
the lens release lever O while
turning the lens counter-
clockwise with your right hand.
If
you
have
to
put
the
lens
down without the rear lens
cap,
place
it
only
front-element
down, never front-element-up.
When changing lenses outdoors
the camera, avoid
unlight
with film
direc