Pentax Optio P80 - Page 113

111
3
Taking Pictures
1 Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2 Use the four-way controller (23) to select [White
Balance].
3 Press the four-way controller (5).
The [White Balance] screen appears.
4 Use the four-way controller (23)
to change the setting.
You can check the results of selected white
balance settings on the preview image each
time you press the four-way controller
(23).
5 Press the 4 button.
The setting is saved.
6 Press the 3 button.
The camera returns to capture status.
Refer to “To Set the White Balance Manually” on the following page for
instructions on adjusting the white balance manually.
If you change the [White Balance] setting frequently, you can save time
by assigning it to the Green button (p.121).
Saving the White Balance setting 1p.127
MENU
Cancel
C a n c e l
Auto
A u t o
OK
O K
OKCancel
Auto
OK
White Balance