223
8
Connecting to a Computer
Connecting to a Macintosh
Connect your camera to the Macintosh using the provided USB cable (I-
USB7).
1
Turn your Macintosh on.
2
Turn your camera off.
3
Connect your camera to the Macintosh using the USB
cable.
Connect the terminal of the USB cable with arrow mark facing the
front side of the camera.
4
Turn your camera on.
The camera is recognized as [NO_NAME] on the
desktop.
Connecting the Camera and Your Macintosh
• If the SD Memory Card has a volume label, the volume label name
appears instead of [NO_NAME]. A new unformatted SD Memory Card
may show the manufacturer’s name or model number.
• The self-timer lamp blinks while the camera is connected to a
Macintosh.
To Next Page
Loading...
