117
3
Taking Pictures
Use this setting to specify whether or not an Instant Review is displayed
immediately after images are shot. The default setting is O (On).
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [Instant
Review].
3
Use the four-way controller (45)
to select O or P.
O Instant Review is displayed.
P Instant Review is not displayed.
4
Press the 3 button.
The camera returns to capture status.
The Pixel Track SR function does not work in the following situations:
- When C (Half-length Portrait), C (Movie), S (Fireworks),
N (Frame Composite), X (Digital Wide) or F (Digital
Panorama) mode is selected as the shooting mode
- When g (Self-timer), j (Continuous Shooting) or K (Burst
Shooting) is selected as the drive mode
- When the flash discharges
- When the sensitivity is set to 1600 or higher
- During Voice Recording
Setting the Instant Review
Instant Review 1p.69
If the Blink Detection function worked when shooting, the message
[Closed eyes have been detected] appears for 3 seconds during Instant
Review.
Rec. Mode
Instant Review
MENU
Exit
2/4
Movie
D-Range Setting
Blink Detection
Digital Zoom
EV Compensation
0.0
To Next Page
Loading...
