Pentax Optio P80 - Page 215

213
8
Connecting to a Computer
4 Press the four-way controller (5).
A pull-down menu appears.
5 Use the four-way controller (23)
to select [MSC].
6 Press the 4 button.
The setting is saved.
7 Press the 3 button.
The camera returns to A mode or Q mode.
MSC (Mass Storage Class)
A general-purpose driver program that handles devices connected to the
computer via USB as a memory device. Also indicates a standard for
controlling USB devices with this driver.
By simply connecting a device that supports USB Mass Storage Class,
you can copy, read, and write files from a computer without installing a
dedicated driver.
PTP (Picture Transfer Protocol)
A protocol that allows transfer of digital images and control of digital
cameras via USB, standardized as ISO 15740.
You can transfer image data between devices that support PTP without
installing a device driver.
Unless otherwise specified, select MSC when connecting the Optio P80
to your computer.
Proceed to the following pages depending on your computer.
Connecting to a Windows PC 1 p.214
Connecting to a Macintosh 1 p.223
MSC and PTP
Setting
1/3
MENU
Cancel
OK
OK
MSC
PTP
Sound
Date Adjustment
World Time
Folder Name
USB Connection
08/08/2009
English