Pentax OptioV20 - Framing Your Pictures (Frame Composite)

66
4
Taking Pictures
In Y (Frame Composite) mode, you can take pictures using the frames
stored in the camera.
1 Press the four-way controller (2) in A mode.
2 Use the four-way controller (45)
to select Y (Frame Composite)
and press the 4 button.
A 9-frame display of the frame selection
screen appears.
3 Use the four-way controller
(2345) to choose the frame you
want to use.
4 Turn the Zoom/f/y lever towards
y.
The selected frame appears in single-image
display. You can choose another frame
using either of the following operations.
• Use the four-way controller (45) to
choose a different frame.
•
Turn the Zoom/ f / y lever to f to return to the 9-frame display of the
frame selection screen, and then perform Step 4 to choose a different
frame.
5 Press the 4 button.
The frame appears on the screen.
Framing Your Pictures (Frame Composite)
Shutter release
button
Four-way controller
4 button
Zoom/f/y lever
3 button
OK
O K
OK
OK
OK
O K
OK
OK