21
You can perform the following functions by using the four-way
controller.
zFlash Mode
Select from C (Auto Flash Discharge), i (Auto Flash+Red-eye
Reduction), b (Flash On), D (Flash On+Red-eye Reduction), G
(Slow-speed Sync), H (Slow-speed Sync+Red-eye), I (Trailing
Curtain Sync), or a (Flash Off).
The flash modes that can be selected differ depending on the
capture mode.
Slide the flash pop-up switch to pop up the built-in flash.
zSensitivity
Select from [ISO AUTO] or [ISO] (fixed value).
zDrive Mode
Select from 9 (Single Frame Shooting), g
(Continuous Shooting), g (Self-timer), h
(Remote Control), or l (Exposure Bracketing).
zWhite Balance
F (Auto White Balance), G (Daylight), H (Shade), ^
(Cloudy), J (Fluorescent Light), I (Tungsten), L (Flash), f,
or K (Manual).
2
3
54
Using the Four-way Controller
Pentax_Q_QSG.book Page 21 Wednesday, August 24, 2011 9:01 AM
To Next Page
Loading...
