7
• The SD Memory Card is equipped
with a write-protect switch. Setting
the switch to LOCK prevents new
data from being recorded on the
card, the stored data from being
deleted, and the card from being
formatted by the camera or
computer.
• The SD Memory Card may be hot when removing the card immediately
after using the camera.
• Do not remove the SD Memory Card or turn off the power while the card is
being accessed. This may cause the data to be lost or the card to be
damaged.
• Do not bend the SD Memory Card or subject it to violent impact. Keep it
away from water and store away from high temperatures.
• Do not remove the SD Memory Card while formatting. The card may be
damaged and become unusable.
• Data on the SD Memory Card may be deleted in the following
circumstances. We do not accept any liability for data that is deleted if
1. the SD Memory Card is mishandled by the user.
2. the SD Memory Card is exposed to static electricity or electrical
interference.
3. the SD Memory Card has not been used for a long time.
4. the SD Memory Card or the battery is removed while the card is being
accessed.
• If the SD Memory Card is not used for a long time, the data on the card may
become unreadable. Be sure to regularly make a backup of important data
on a computer.
• Format new SD Memory Cards. Also format SD Memory Cards used with
other cameras.
Other Precautions
Write-protect
switch
Pentax_Q_QSG.book Page 7 Wednesday, August 24, 2011 9:01 AM
To Next Page
Loading...
Need help?
General
