36
2
Getting Started
7
Press the four-way controller
(5).
The frame moves to the month.
8
Use the four-way controller (23) to set the month.
Change the day and year in the same manner.
Next, change the time.
If you select [12h] in Step 4, the setting switches between am and pm
depending on the time.
9
Press the 4 button.
The camera is ready to take pictures. If you set the date and time with
the menu operations, the screen will return to the [H Set-up] menu.
Press the 4 button again.
• When you finish the settings and press the 4 button, the camera clock is
reset to 00 seconds.
• To set the exact time, press the 4 button when the time signal (on the TV,
radio, etc.) reaches 00 seconds.
• You can change the language and date and time settings with the menu
operations. (p.163, p.167)
You can cancel the setting operation and switch to Capture mode during initial
settings by pressing the 3 button. In this case, the Initial Settings screen
will appear again the next time you turn the camera on.
24h
00 :
00
mm/dd/yy
2004/0101 /
Date Style
Date Adjust
Date
Time
OK
OKCancel
To Next Page
Loading...
