Pentax SLR - Printing All Images

88
3
Basic Operations
10 Press the 4 button.
11 Repeat Steps 8 to 10 to set [Paper Type], [Quality] and
[Border Status].
The print settings change screen appears after each item has been set.
When the Paper Size is set to [Standard], images are printed according
to the printer settings.
Paper Type with more E support higher quality paper.
Quality with more E indicate higher print quality.
12 Press the 4 button twice.
The image is printed according to the settings.
Press the 3 button to cancel printing.
1 Use the four-way controller
(23) to select [Print All] on the
PictBridge menu.
2 Press the 4 button.
The Print all images screen appears.
Printing All Images
Print One
Print All
DPOF AUTOPRINT
OK
OK
OK
OK
Select printing mode
Select printing mode
Select printing mode