9
Safety Notes for the USB Power Adapter
Always use the USB power adapter exclusively developed for this product, with the specified power and
voltage. Using a power adapter not exclusive to this product, or using the exclusive power adapter with an
unspecified power or voltage can cause a fire, electric shock, or camera breakdown. The specified voltage
is 100- 240V AC.
Do not disassemble or modify the product. This can cause a fire or electric shock.
Do not subject the product to strong impacts or allow it to drop onto a hard surface. This can cause a
malfunction.
Do not short or touch the output terminals of the product while it is still plugged in.
If water should happen to get inside the product, consult your nearest service center. Continuing to use
the product can cause a fire or electric shock.
If the generation of smoke or strange odor from the product or other abnormality occurs, immediately
discontinue its use and consult your nearest service center. Continuing to use the product can cause a fire
or electric shock.
Do not use the power adapter to charge a battery other than the rechargeable lithium-ion battery D-LI96.
This can cause overheating, explosion, or power adapter failure.
Do not plug in the USB power adapter with wet hands. This can cause an electric shock.
Do not place heavy objects on the USB cable, allow heavy objects to drop onto it or allow it to become
damaged due to excessive bending. If the USB cable becomes damaged, consult our customer service
center.
To Next Page
Loading...
