Pentax WG-1000 - Copy to Card; File Numbering

87
File Numbering
After you take a picture or video clip, the camera will
automatically save it with a sequential number. You
can use this to reset the file numbering to 1.
File Numbering
Create a new directory and reset
the file number.
Yes
No
Copy to Card
Use this setting to copy the files stored in the
camera’s built-in memory to a memory card.
Copy to Card
Copy files from built-in memory to
the memory card.
Yes
No
If there is no card available in the camera, this
function will not be displayed.