38
Panorama Mode
This feature allows you to capture a panoramic view that will have significantly more content than a single
photograph. Follow the arrow while keeping the camera steady to seamlessly shoot an ultra-wide scene of up
to 360 degrees.
1. Press the [
]/[ ]/[ ]/[ ] buttons to select a desired shooting direction. Should you not
select a direction, the default shooting direction is “right.”. 2 seconds later, the camera will be ready to
take pictures. You can also press the button or press the Shutter button halfway down to get ready to
take panaramic pictures.
2. Compose your shot on the monitor and half press the Shutter button to focus on the subject. After
focusing, fully press the Shutter button down to take the first picture. At this time, the process dialog of
panorama mode stitching appears on the screen.
1/50F3.3
Save
Cancel
3. Pan the camera according to the set direction. When the range of motion does not exceed the range that
the camera can detect, the progress bar behind the arrow partially turns green. When it completely turns
green, panorama mode shooting is finished.
In Panorama Mode, the Flash, Self-timer, Macro Modes and Exposure Compensation are not available.
Focus Adjustment is also not available at this time.
During Panorama Mode shooting, press the
button to interrupt shooting and save the current
pictures. Press the [ ] button to cancel shooting and delete previously taken pictures.
To Next Page
Loading...
