Pentax Optio Optio WG-1

Questions and Answers

C
Christopher MartinJul 29, 2025
What to do if the shutter will not release on Pentax Digital Camera?
- E
  Edward ArellanoJul 29, 2025
  If the shutter won't release on your Pentax Digital Camera, it could be due to several reasons. The flash might be charging, in which case you should wait until charging is finished. Alternatively, there might be no available space on the SD Memory Card or in the built-in memory; insert an SD Memory Card with available space or delete unwanted images. Finally, the camera might be in the process of recording; wait until recording is finished.
R
Ryan ClarkAug 2, 2025
How to fix a Pentax Digital Camera when the subject is not in focus?
- M
  Monica JohnsonAug 3, 2025
  If the subject is not in focus on your Pentax Digital Camera, it could be because the subject is difficult to focus on with autofocus (e.g., low contrast, dark, finely-patterned, or rapidly-moving subjects, or shooting through a window or net). Alternatively, the subject may not be in the focusing area. Locate the desired subject in the focus frame (focusing area) in the center of the display. If it is difficult to do so, first lock the focus on the desired subject (focus lock), and then move the camera to recompose.
D
daniel60Aug 6, 2025
Why won't my Pentax Optio Optio WG-1 Digital Camera turn on?
- D
  David HoweAug 6, 2025
  Your Pentax Digital Camera might not be turning on because the battery isn't installed, is installed incorrectly, or is exhausted. Check if a battery is installed, and if not, install one. Verify the battery's orientation, matching the + and - symbols in the battery compartment. If the battery is exhausted, charge it.
A
Amy GibsonAug 11, 2025
Why is there no image on the display of my Pentax Optio Optio WG-1?
- J
  Jennifer BurtonAug 11, 2025
  If no image appears on the display of your Pentax Digital Camera, it could be because the camera is connected to a computer or TV, which turns off the display. Alternatively, the display might be set to off. Press the 4/W button to turn the display on.
W
William BatesAug 15, 2025
Why is my Pentax Optio Optio WG-1 Digital Camera picture dark when using the flash?
- V
  Veronica AndersonAug 15, 2025
  If your Pentax Digital Camera picture is dark when using the flash, the subject may be too far away in a dark environment. Take pictures within the specified flash range.
Y
ydanielAug 19, 2025
Why does the flash not discharge on my Pentax Optio Optio WG-1 Digital Camera?
- J
  Jacqueline FowlerAug 19, 2025
  The flash on your Pentax Digital Camera may not discharge if the flash mode is set to (Flash Off). Set the flash mode to (Auto) or (Flash On). The flash also does not discharge if the Drive Mode is set to j (Continuous Shooting), c (Burst Shooting), or l (Auto Bracketing); the Focus Mode is set to s (Infinity); or the Shooting Mode is set to d (Movie), (Underwater Movie), S (Fireworks) or (Digital Microscope).
R
Richard RogersAug 23, 2025
How to improve display visibility on Pentax Optio Optio WG-1?
- A
  austin89Aug 23, 2025
  If the display is hard to see on your Pentax Digital Camera, it could be because the brightness level is set too dark. Adjust the brightness level in [Brightness Level] in the [W Setting] menu. Alternatively, the Power Saving function might be on. Press a button to return to the normal brightness level, or select [Off] in [Power Saving] in the [W Setting] menu to turn the Power Saving function off.

Pentax Optio Optio WG-1 Specifications

General

Camera type	Compact
Effective pixels	14 megapixels
Sensor size	1/2.3 inch
Sensor type	CCD
Focal length (equiv.)	28 - 140 mm
Optical zoom	5x
Screen dots	230, 000
Max shutter speed	1/4000 sec
Format	JPEG
USB	USB 2.0
Battery Life	260 shots
ISO	6400
Maximum aperture	f/3.5 - f/5.5
Screen size	2.7"
Storage types	SD/SDHC
Weight	167 g
Dimensions	116 x 59 x 29 mm
Waterproof	Yes, up to 10 m
Shockproof	Yes, up to 1.5 m
Coldproof	-10°C
Video Recording	Yes, 1280 x 720 (30 fps)
Battery	D-LI92
Shutter Speed	1/4000 - 4 sec