Pentax Optio Optio WG-1 User Manual

255
7
Settings
You can reset the camera settings to their defaults. Refer to “Default
Settings” (p.291) for the reset settings.
1 Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
2 Use the four-way controller (23) to select [Reset].
3 Press the four-way controller (5 ).
The [Reset] screen appears.
4 Use the four-way controller
(2) to select [Reset].
5 Press the 4 button.
The settings return to the defaults.
• Once the start-up screen has been set, it is not being deleted even if
the original image is deleted or the SD Memory Card or built-in memory
is formatted. However the image is deleted if you change the start-up
screen after deleting the recorded image or formatting the memory.
• Select [Off] to hide the start-up screen.
• The start-up screen is not displayed when you turn the camera on in
the playback mode.
• Movies or images taken at F (Digital Panorama) mode cannot be
used for the start-up screen.
Resetting to Default Settings (Reset)
The following settings are not affected by resetting:
• Date Adjustment
•World Time
• Language/
• Video Out
• The folder name that you created
OK
OK
Reset
Returns to default
settings
Reset
Cancel

Pentax Optio Optio WG-1 Specifications

General

Brand	Pentax
Model	Optio Optio WG-1
Category	Digital Camera
Language	English