To Next PageTo Next PageWhy Pentax Optio W20 Digital Camera will not turn on?
Your Pentax Digital Camera might not be turning on because the battery is not installed, is installed incorrectly, or the battery power is low. Check if the battery is installed correctly according to the + and - symbols. If the battery is low, charge it.
What to do if subject is not in focus on Pentax Digital Camera?
If your subject is not in focus, ensure the subject is within the focusing area in the middle of the LCD monitor. If it's outside, aim the camera, lock the focus by pressing the shutter release button halfway, then recompose the picture and fully press the shutter button.
Why is picture dark with Pentax Optio W20?
If your picture is dark, it could be because the subject is too far away in a dark environment. Try taking the picture within the flash range.
Why shutter will not release on Pentax Optio W20?
The shutter might not release because the flash is charging, there's no available space on the SD Memory Card or in the built-in memory, or the camera is recording. Wait until the flash finishes charging or the recording is complete. You can also insert an SD Memory Card with available space or delete unwanted images.
How to fix USB connection with computer that doesn't work properly on Pentax Digital Camera?
If the USB connection with your computer isn't working correctly, the USB connection mode might be set to [PictBridge]. Change the USB connection mode to [PC].
How to fix USB connection with printer that doesn't work properly on Pentax Optio W20 Digital Camera?
If the USB connection with your printer isn't functioning as expected, the USB connection mode may be set to [PC]. Change the USB connection mode to [PictBridge].
Why flash does not discharge on Pentax Digital Camera?
The flash might not be discharging because the flash mode is set to a (flash off), or the drive mode is set to 1 or c, the focus mode is set to s, or the shooting mode is set to C, y or Q. The flash will not discharge in these modes. Set to Auto or b (Flash On).
What to do if there is no image on LCD monitor of Pentax Digital Camera?
If there is no image on the LCD monitor, it might be off because the camera is connected to a PC or TV. The LCD monitor could also be set to OFF. Press the 4/W button to turn the LCD monitor on. If the image is hard to see, especially in sunlight, increase the brightness of the LCD monitor.
General| Megapixel | 7.41 MP |
|---|---|
| Sensor type | CCD |
| Image sensor size | 1/2.5 \ |
| Optical zoom | 3 x |
| Focal length range | 6.3 - 18.9 mm |
| Digital SLR | No |
| Built-in flash | Yes |
| Camera shutter speed | 1/2000 - 4 s |
| Compatible operating systems | -Windows 98 / 98SE / Me / 2000 / XP -Mac OS: 9.2, X 10.1 + |
| Focus | TTL |
| Normal focusing range | 0.4 - ∞ m |
| Auto focusing (AF) modes | multi point auto focus, spot auto focus |
| Macro focusing range (wide) | 0.01 - 0.6 m |
| Manual focusing range (tele) | 0.5 m |
| Manual focusing range (wide) | 0.01 m |
| Flash modes | Flash off, Red-eye reduction |
| Flash range (tele) | 0.5 - 4 m |
| Flash range (wide) | 0.3 - 5 m |
| Internal memory | 22 MB |
| Compatible memory cards | sd |
| Motion JPEG frame rate | 30 fps |
| Video formats supported | MOV |
| Maximum video resolution | 640 x 480 pixels |
| Display diagonal | 2.5 \ |
| Display resolution (numeric) | 115000 pixels |
| USB version | 2.0 |
| Product color | Silver |
| Battery type | D-LI8 |
| Scene modes | Landscape |
| White balance | auto, daylight, Fluorescent, manual, Shade, Tungsten |
| Light metering | Centre-weighted, Spot |
| Light exposure modes | Auto |
| Camera shutter type | Electronic |
Weight and Dimensions| Depth | 23 mm |
|---|---|
| Width | 106.5 mm |
| Height | 54.5 mm |
| Weight | 150 g |
Explains warning symbols used in the manual for safe operation.
Highlights the camera's water resistance and dustproof performance.
Labels and describes the physical camera components and parts.
Step-by-step guide for charging the camera's battery.
Steps for inserting and managing SD memory cards.
Guide to selecting the menu language for the camera interface.
Procedure for setting the camera's internal clock.
Basic steps for capturing still images with the camera.
Explains the purpose and function of each camera button.
Differentiates between capture (A) and playback (Q) modes.
Options for setting the camera's focus mode.
Available flash modes and their usage.
Explains how the camera saves current settings automatically.
Basic steps for recording video clips with sound.
How to view still pictures and navigate through them.
Steps to restore accidentally deleted files.
Adjusting image dimensions and quality for file size reduction.
Steps to connect the camera for direct printing via USB.
Erasing all data from storage media.
Procedure for setting the camera's clock.
Troubleshooting steps for common camera problems.
Technical specifications for movie recording and camera lens.
Statements regarding regulatory compliance for USA and Canada.
