Pentax Optio W20 - Setting the Image Sharpness (Sharpness)

101
4
Taking Pictures
R C Y C 4
You can give the image sharp or soft outlines.
1 Press the 3 button in A mode.
The [A Rec.Mode] menu appears.
2 Use the four-way controller (23) to select [Sharpness].
3 Use the four-way controller (45)
to change the sharpness level.
The following setting is saved.
F (Soft)
G (Normal)
H (Hard)
4 Press the 3 button.
The Sharpness setting is saved and the camera returns to capture
status.
Setting the Image Sharpness (Sharpness)
If you use the [Sharpness] function frequently, you can save time by
assigning it to the Green button. (p.58)
Rec.Mode
MENU
Exit
E x i t
Exit
1/3
7 M
Recorded Pixels
Quality Level
White Balance
AE Metering
Sensitivity
AWB
ISO
AUTO
MENU
2, 3
1, 4
MENU
3/3
S
QUICK
Rec.Mode
Instant Review
Memory
Sharpness
Saturation
Contrast
Exit