To Next PageTo Next PageWhat to do if the shutter will not release on Pentax Optio W80 Digital Camera?
If the shutter on your Pentax Digital Camera won't release, it could be due to these reasons: * The flash is charging. Wait until charging is finished. * There is no available space on the SD Memory Card or in the built-in memory. Insert an SD Memory Card with available space. * The camera is recording. Wait until recording is finished.
How to fix the focus on my Pentax Optio W80?
If the subject is not in focus on your Pentax Digital Camera, it could be because: * The subject is difficult to focus on with autofocus. The camera may have difficulty in focusing on subjects such as low contrast subjects, dark subjects, finely-patterned objects, or rapidly-moving objects. Try shooting using the focus lock, or Manual Focus. * The subject is not in the focusing area. Locate the desired subject in the focus frame in the center of the display. If it is difficult to do so, first lock the focus on the desired subject (focus lock), and then move the camera to recompose.
Why my Pentax Digital Camera will not turn on?
Your Pentax Digital Camera might not turn on for a few reasons: * The battery may not be installed. Ensure a battery is installed. * The battery might be installed incorrectly. Check the battery's orientation and reinsert it according to the + and - symbols in the battery compartment. * The battery could be exhausted. Try charging the battery.
Why no image appears on the display of my Pentax Digital Camera?
If no image appears on the display of your Pentax Digital Camera, it might be because: * The camera is connected to a computer. The display is off when the camera is connected to a computer. * The camera is connected to a TV. The display is off when the camera is connected to a TV. * The display is set to off. Press the 4/W button to turn the display on.
How to make the display brighter on Pentax Optio W80 Digital Camera?
If the display on your Pentax Digital Camera is hard to see, it could be due to: * The brightness level of the display is set too dark. Adjust the brightness level in [Brightness Level] in the [W Setting] menu. * The Power Saving function is on. When the Power Saving function is on, the display automatically darkens after a certain amount of time. Press a button to return to the normal brightness level. Select [Off] in [Power Saving] in the [W Setting] menu to turn the Power Saving function off.
Why the flash does not discharge on my Pentax Optio W80?
The flash on your Pentax Digital Camera may not discharge because: * The flash mode is set to a (Flash Off). Set to (Auto) or b (Flash On). * The Drive Mode is set to j (Continuous Shooting), c (Burst Shooting), or l (Auto Bracket); the Focus Mode is set to s (Infinity); or the Shooting Mode is set to d (Movie), (Underwater Movie), or S (Fireworks). The flash does not discharge in these modes.
Why is my Pentax Digital Camera picture dark when using the flash?
If your Pentax Digital Camera picture is dark when using the flash, it may be that the subject is too far away in a dark environment, such as a night scene. Take pictures within the specified flash range.
General| Megapixel | 12 MP |
|---|---|
| Camera type | Compact camera |
| Sensor type | CCD |
| Image stabilizer | Yes |
| Maximum image resolution | 4000 x 3000 pixels |
| Still image resolution(s) | 640 x 480, 1024 x 768, 2048 x 1536, 2592 x 1944, 3072 x 2304, 4000 x 2256, 4000 x 2672 |
| Digital zoom | 6.25 x |
| Optical zoom | 5 x |
| Digital SLR | No |
| Aperture range (F-F) | 3.5 - 5.5 |
| Camera shutter speed | 1/1500 - 1/4 s |
| Minimum system requirements | USB port |
| Compatible operating systems | Windows 2000/XP/Vista MacOS-X 10.1.2 - 10.5 |
| Internal memory | 33.7 MB |
| Compatible memory cards | sd, sdhc |
| Motion JPEG frame rate | 30 fps |
| Video formats supported | AVI |
| Maximum video resolution | 1280 x 720 pixels |
| Display diagonal | 2.5 \ |
| Display resolution (numeric) | 230000 pixels |
| Product color | Gray |
| Battery type | D-LI78 |
| Auto focusing (AF) modes | multi point auto focus, spot auto focus |
| Flash modes | auto, Flash off, Red-eye reduction |
| Scene modes | beach, Candlelight, Close-up (macro), Documents, Fireworks, Museum, Night, Night landscape, Night portrait, Panorama, Portrait, self-portrait, Sports, Sunset, Underwater, Landscape (scenery) |
| Photo effects | black&white, Sepia |
| White balance | auto, daylight, Fluorescent, manual, Shade, Tungsten |
| Camera shutter type | Electronic |
Weight and Dimensions| Depth | 56 mm |
|---|---|
| Width | 99.5 mm |
| Height | 24.5 mm |
| Weight | 135 g |
Connects the camera strap to the camera body for secure carrying.
Instructions on charging and installing the camera battery for operation.
Guide to inserting and removing SD and SDHC memory cards for storage.
Steps for setting the initial display language and date/time upon first use.
Explanation of the purpose and operation of the camera's main buttons and controls.
Procedure for changing between photo/video capture (A mode) and image viewing (Q mode).
Guide to navigating and using the camera's menu system for settings.
Basic guide to capturing still images using the camera's default settings.
How to select various shooting modes from the Capture Mode Palette for different scenes.
Details on how the camera detects and focuses on faces for optimal portraits.
Instructions for using the Auto Picture mode for automatic scene selection.
Guide to operating the optical, intelligent, and digital zoom functions for framing.
Methods for viewing still pictures, movies, and sound files on the camera display.
Procedures for deleting single, selected, or all image and sound files.
In-camera functions for resizing, cropping, and applying digital filters to images.
Details on applying various artistic filters like B&W, Sepia, and Toy Camera.
Overview of various camera settings including formatting, sound, date, and language.
Instructions for initializing an SD Memory Card to ensure compatibility and clear data.
Procedure for setting the camera's internal clock and date display format.
How to select the preferred language for menus and messages on the camera.
Instructions for installing software and checking system requirements for PC connection.
Step-by-step guide for connecting the camera to a Windows computer via USB.
Process for copying photos and videos from the camera to a Windows PC using ACDSee.
Step-by-step guide for connecting the camera to a Macintosh computer via USB.
Table detailing feature availability across different camera shooting modes.
Common problems, their causes, and suggested solutions for camera issues.
List of factory default settings for various camera functions and menus.
Technical details and specifications of the camera's hardware and capabilities.
Information regarding the product's warranty coverage and service procedures.
