Pentax Optio W80 - Default Settings

255
9
Appendix
Default Settings
The table below lists the factory default settings.
The meaning of the indications for menu items with an initial setting is
explained below.
Last Memory Setting
Yes : The current setting (last memory) is saved when the
camera is turned off.
No : The setting returns to the initial setting when the camera is
turned off.
* : The setting depends on the [Memory] setting (p.143).
—:N/A
Reset Setting
Yes : The setting returns to the default setting with the Reset
function (p.221).
No : The setting is saved even after reset.
—:N/A
[A Rec. Mode] Menu Items
Item
Default Setting
(Shooting mode:A)
Last
Memory
Setting
Reset
Setting
Page
Image Tone Bright Yes Yes p.111
Pixel Track SR P (Off) Yes Yes p.112
Recorded Pixels E (4000×3000) Yes Yes p.113
Quality Level D (Better) Yes Yes p.115
White Balance F (Auto) * Yes p.116
AF
Setting
Focusing Area J (Multiple) Yes Yes p.108
Auto Macro O (On) Yes Yes p.109
Focus Assist O (On) Yes Yes p.110
AE Metering L (Multi-segment) * Yes p.118
Sensitivity AUTO (64-800) * Yes p.119
ISO Corction in AUTO 64-800 * Yes p.120
EV Compensation ±0.0 * Yes p.121
e_kb485.book Page 255 Friday, July 3, 2009 9:18 AM