120
3
Taking Pictures
Set the sensitivity range when the sensitivity is set to AUTO.
The sensitivity can be set to 64-100, 64-200, 64-400, 64-800, and 64-1600.
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [ISO
Corction in AUTO].
3
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller (23)
to select the sensitivity
adjustment range.
5
Press the 4 button.
The setting is saved.
6
Press the 3 button.
The camera returns to capture mode.
• When the sensitivity is set to 3200 or 6400, the number of recorded
pixels is fixed at f (2592×1944).
• When set to
c
(Digital SR), 9 (Green), C (Movie), or
(Underwater Movie) mode, only [AUTO] is available.
• When set to S (Fireworks) mode, the sensitivity is fixed at 64.
•
When sizes of or are selected, you cannot select 3200 or 6400.
• When the shooting mode is set to (Report), the AUTO is fixed at
64-6400. Other sensitivities can also be selected.
Saving the Sensitivity setting 1p.143
Setting ISO Correction in AUTO
3:2 16:9
ISO64-200
ISO64-100
ISO64-400
ISO64-800
ISO64-1600
MENU
2/4
Rec. Mode
Cancel
OK
OK
To Next Page
Loading...
