Pentax Optio W80 - Setting the Functions (Program Mode)

77
3
Taking Pictures
In R (Program) mode, the shutter speed and the aperture are set
automatically by the camera during shooting. However, you can select
other functions such as the flash mode and recorded pixels.
1 Press the four-way controller (3) in A mode.
The Capture Mode Palette appears.
2 Use the four-way controller (2345) to select R
(Program).
3 Press the 4 button.
Program mode is selected and the camera
returns to capture mode.
When the camera recognizes a person’s face,
the Face Recognition function is activated and
the face recognition frame appears (p.73).
4 Set the functions you want to use.
Refer to “Setting the Shooting Functions” (p.103 - p.129) for details of
how to set the functions.
5 Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
6 Press the shutter release button fully.
The picture is taken.
Setting the Functions (Program Mode)
Taking Still Pictures 1p.66
Four-way controller
4 button
Shutter release button
38
3 8
38
14:25
1 4 : 2 5
14:25
0 7 / 0 7 / 2 0 0 907/07/2009
e_kb485.book Page 77 Friday, July 3, 2009 9:18 AM