Pentax Optio W80 - Setting the Quick Zoom Function

217
7
Settings
While playing back images in Q mode, you can set whether to use
Quick Zoom to enlarge the playback image to 10× when pressing the y
button once.
1 Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
2 Use the four-way controller (23) to select [Quick
Zoom].
3 Use the four-way controller ( 45 ) to
switch between
O (On) or P (Off).
O (On) : The Quick Zoom is available.
P (Off) : The Quick Zoom is not available.
4 Press the 3 button.
The camera returns to A mode or Q mode.
Setting the Quick Zoom Function
Setting
Power Saving
Auto Power Off
3 min.
5 sec.
Video Out
Brightness Level
2/3
MENU
Exit
NTSC
Quick Zoom
USB Connection
MSC
e_kb485.book Page 217 Friday, July 3, 2009 9:18 AM