122
3
Taking Pictures
Expands the dynamic range and the light level expressed by the CCD
sensor and prevents bright and dark areas from occurring. After setup,
an icon is displayed when taking still pictures.
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [D-Range
Setting].
3
Press the four-way controller (5).
The [D-Range Setting] screen appears.
You can set whether to compensate for overexposed parts of the
subject. The default setting is P (Off).
4
Use the four-way controller (23)
to select [Highlight Correction].
5
Use the four-way controller (
45
) to select [
O
(On)/
P
(Off)].
The setting is saved.
D-Range Setting
Displayed when Highlight Correction and Shadow Correction are O
(On).
Displayed when Highlight Correction is O (On) and Shadow
Correction is P (Off).
Displayed when Highlight Correction is P (Off) and Shadow
Correction is O (On).
Not displayed Both are set to P (Off).
Setting the Highlight Correction
H
To Next Page
Loading...
