232
8
Connecting to a Computer
Connecting to a Windows PC
Connect your camera to the Windows PC using the provided USB cable
(I-USB7).
1
Turn your Windows PC on.
2
Turn your camera off.
3
Connect your camera to the Windows PC using the USB cable.
Connect the terminal of the USB cable with pointing toward the 4
on the PC/AV terminal on the bottom of the camera.
4
Turn the camera on.
The “Device Detector” screen appears.
If the “Device Detector” screen does not appear, follow the steps in
“When the “Device Detector” screen does not appear” (p.234).
Connecting the Camera and a Windows PC
The power lamp is lit while the camera is connected to a PC, whereas it
blinks while the card is being accessed.
We recommend using the optional AC adapter kit K-AC78 when the
camera is connected to the computer (p.37). If the battery runs out of
power while images are being transmitted to the computer, the image
data may be lost or damaged.
e_kb485.book Page 232 Friday, July 3, 2009 9:18 AM
To Next Page
Loading...
