Pentax Optio W80 - Setting the Image Sharpness (Sharpness)

127
3
Taking Pictures
3 Use the four-way controller (45)
to switch between O (On) or P
(Off).
O (On) Instant Review is displayed.
P (Off) Instant Review is not
displayed.
The setting is saved.
4 Press the 3 button.
The camera returns to capture mode.
You can give the image sharp or soft outlines.
1 Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2 Use the four-way controller (23) to select [Sharpness].
3 Use the four-way controller (45)
to change the sharpness level.
F Soft
G Normal
H Sharp
4 Press the 3 button.
The setting is saved and the camera returns to capture mode.
Instant Review 1p.69
If the Blink Detection function worked when shooting, [Closed eyes have
been detected.] is displayed for 3 seconds during Instant Review.
Setting the Image Sharpness (Sharpness)
Rec. Mode
MENU
Exit
3/4
Memory
Green Button
Blink Detection
Digital Zoom
Instant Review
Interval Shoot
Rec. Mode
Contrast
Off
MENU
Exit
4/4
Saturation
Date Imprint
Sharpness
e_kb485.book Page 127 Friday, July 3, 2009 9:18 AM