Pentax Optio W80 - Setting the Image Tone

111
3
Taking Pictures
For setting the tone of still pictures.
You can select from [Bright], [Natural], or [Monochrome].
The default setting is [Bright].
1 Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2 Use the four-way controller (23) to select [Image
Tone].
3 Press the four-way controller (5).
A pull-down menu appears.
4 Use the four-way controller (23)
to select a finishing tone.
5 Press the 4 button.
The setting is saved.
6 Press the 3 button.
The camera returns to capture mode.
Setting the Image Tone
• When [Monochrome] is selected, [Tone Adjustment] appears on the
[A Rec. Mode] menu for setting the tone of monochrome images
instead of [Saturation].
• Select [Monochrome] in (Report) mode to fix the Tone Adjustment
setting to [Standard].
Rec. Mode
MENU
Cancel
1/4
Image ToneBright
Natural
Monochrome
Recorded Pixels
Quality Level
White Balance
AWB
Pixel Track SR
AF Setting
OK
OK
OK
OK
e_kb485.book Page 111 Friday, July 3, 2009 9:18 AM