205
7
Settings
13
Change the time in the same way as in steps 8 to 12.
If you selected [12h] in step 7, the setting switches between am and
pm corresponding to the time.
14
Press the 4 button.
15
Press the four-way controller (3).
The frame moves to [Settings complete].
16
Press the 4 button.
The date and time settings are saved and the screen returns to the
[W Setting] menu.
You can set the alarm to ring at a specified time.
You can choose whether the alarm will ring at the same time every day
or only once at the set time.
1
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
2
Use the four-way controller (23) to select [Alarm].
3
Press the four-way controller (5).
The Alarm screen appears.
When you press the 4 button in step 16, the camera clock is reset to
00 seconds. To set the exact time, press the 4 button when the time
signal (on the TV, radio, etc.) reaches 00 seconds.
Setting the Alarm
Setting the Alarm
Alarm
14:14
MENU
Alarm Off
Time
00:00
Cancel
Settings complete
e_kb485.book Page 205 Friday, July 3, 2009 9:18 AM
To Next Page
Loading...
