50
1
Getting Started
8
Use the four-way controller (23)
to change the month.
Change the day and year in the same
manner.
Next, change the time.
If you selected [12h] in step 4, the setting
switches between am and pm
corresponding to the time.
9
Press the four-way controller (3).
The frame moves to [Settings complete].
10
Press the 4 button.
This confirms the date and time.
If you press the 4 button in step 10, the camera clock is reset to 00
seconds. To set the exact time, press the 4 button when the time
signal (on the TV, radio, etc.) reaches 00 seconds.
When the [Initial Setting] or [Date Adjustment] screen is displayed, you
can cancel the setting operation and switch to the capture mode by
pressing the 3 button. In this case, the [Initial Setting] screen will
appear next time you turn the camera on.
[Language/ ], [Date], [Time], [Hometown] and [DST] can be changed. Refer
to the pages below for instructions.
• To change the language, follow the steps in “Changing the Display Language”
(1p.211).
• To change the date and time, follow the steps in “Changing the Date and
Time” (1p.203).
• To change the city or turn DST on and off, follow the steps in “Setting the
World Time” (1p.208).
Date
Adjustment
Cancel
Date Format
Date
Time
00:00
mm dd yy//
24h
MENU
01/01/2009
Settings complete
e_kb485.book Page 50 Friday, July 3, 2009 9:18 AM
To Next Page
Loading...
