274
8
Connecting to a Computer
Connecting to a Macintosh
Connect your camera to the Macintosh using the provided USB cable
(I-USB7).
1
Turn your Macintosh on.
2
Turn your camera off.
3
Connect your camera to the Macintosh using the USB
cable.
Connect the terminal of the USB cable with arrow mark facing the
front side of the camera.
4
Turn your camera on.
The camera is recognized as [NO_NAME] on the
desktop.
Connecting the Camera and Your Macintosh
We recommend using the optional AC adapter kit K-AC117 when the
camera is connected to the computer (p.43). If the battery runs out of
power while images are being transmitted to the computer, the image
data may be lost or damaged.
To Next Page
Loading...
Need help?
General
