To Next PageTo Next PageWhy won't my Pentax Optio WS80 Digital Camera turn on?
Your Pentax Digital Camera might not be turning on for a few reasons. First, check to see if a battery is installed. If not, install a battery. Second, the battery may be installed incorrectly. Reinsert the battery, making sure to align the + and - symbols correctly in the battery compartment. Lastly, the battery might be exhausted, so try charging it.
What to do if the shutter will not release on my Pentax Optio WS80?
If the shutter won't release on your Pentax Digital Camera, it could be due to a few reasons. It may be that the flash is charging; in this case, wait until charging is finished. Alternatively, there might not be enough available space on the SD Memory Card or in the built-in memory. Try inserting an SD Memory Card with available space or delete unwanted images. Finally, the camera might be in the process of recording; wait until recording is finished.
Why is the picture dark when using the flash on my Pentax Optio WS80 Digital Camera?
If your picture is dark when using the flash on your Pentax Digital Camera, it could be that the subject is too far away in a dark environment, like a night scene. The picture becomes dark if the subject is too far away, so take pictures within the specified flash range.
What to do if no image appears on the display of my Pentax Optio WS80?
If no image appears on the display of your Pentax Digital Camera, it could be because the camera is connected to a computer or a TV. The display is off when the camera is connected to either of these.
Why is the subject not in focus on my Pentax Optio WS80 Digital Camera?
If the subject is not in focus on your Pentax Digital Camera, there are a couple of potential reasons. Firstly, the subject may be difficult for the autofocus to lock onto, such as low contrast subjects (like a white wall or blue sky), dark subjects, finely-patterned objects, or rapidly moving objects. Also, shooting through a window or net can cause focusing issues. Try shooting using the focus lock or Manual Focus. Secondly, the subject may not be in the focusing area. Locate the desired subject in the focus frame (focusing area) in the center of the display. If that’s difficult, first lock the focus on the desired subject (focus lock), and then move the camera to recompose.
Why is the display hard to see on my Pentax Optio WS80 Digital Camera?
If the display is hard to see on your Pentax Digital Camera, it could be due to a couple of reasons. First, the brightness level of the display might be set too dark. Adjust the brightness level in [Brightness Level] in the [W Setting] menu. Second, the Power Saving function might be turned on. When this function is on, the display automatically darkens after a certain amount of time. Press a button to return to the normal brightness level. To turn the Power Saving function off, select [Off] in [Power Saving] in the [W Setting] menu.
Why does the flash not discharge on my Pentax Optio WS80 Digital Camera?
The flash on your Pentax Digital Camera might not discharge because the flash mode is set incorrectly. Set it to (Auto) or (Flash On). Also, the flash does not discharge if the drive mode or the focus mode or the shooting mode are set to specific modes.
General| Optical Zoom | 5x |
|---|---|
| Screen Size | 2.7 inches |
| Video Resolution | 640 x 480 |
| Type | Compact |
| Sensor Size | 1/2.3 inch |
| Image Sensor Type | CCD |
| Digital Zoom | 6.25x |
| LCD Screen Resolution | 230, 000 dots |
| Video Frame Rate | 30 fps |
| Storage Media | SD/SDHC |
| Image Sensor | 1/2.3 inch CCD |
| Optical Sensor Resolution | 10 MP |
| Effective Pixels | 10 Megapixels |
| Freeze Proof | Yes (-10°C) |
| Battery Type | Lithium-Ion |
