40
1
Getting Started
Use of the optional AC adapter kit (K-AC88) is recommended if you
intend to use the camera for a long time or connect it to a computer.
1
Make sure that the camera is turned off and open the
battery/card/terminal cover.
2
Remove the battery.
Refer to p.36 - p.37 on how to open/close the battery/card/terminal
cover and remove the battery.
3
Insert the DC coupler, as shown in the illustration, while
holding down the battery lock lever.
Confirm the DC coupler is locked in place.
The battery/card/terminal cover will not close while the DC coupler is
inserted. Leave the cover open when using the AC adapter and do not
attempt to close it.
4
Connect the DC terminal of the AC adapter to the DC
terminal of the DC coupler.
5
Connect the AC plug cord to the AC adapter.
6
Plug the AC plug cord into the power outlet.
Using the AC Adapter
1
2
3
4
AC plug cord
DC terminal
3
1
AC adapter
4
6
5
DC coupler
To Next Page
Loading...
