Pentax Optio WS80 - Taking Still Pictures; Taking Pictures

70
3
Taking Pictures
Taking Still Pictures
The Optio WS80 features a wide range of shooting modes and functions
to suit almost any subject or scene. This chapter describes how to take
pictures with the most commonly used standard settings (the factory
default settings).
1 Press the power switch.
The camera turns on and is ready to take still pictures. In this manual,
this is called “still picture capture mode”.
2 Confirm the subject and shooting
information on the display.
The focus frame in the middle of the display
indicates the zone of automatic focusing.
When the camera recognizes a person’s face,
the Face Recognition function is activated and
the face recognition frame appears (p.76).
You can change the captured area by
pressing the zoom button (p.82).
Right (x) Enlarges the subject.
Left (w) Widens the area that is
captured by the camera.
Taking Pictures
Power switch
Zoom button
Shutter release button
14:25
1 4 :2 5
14:25
38
3 8
38
08/08/2009
0 8 /0 8 / 2 00 9
08/08/2009
Focus frame
14:25
1 4 :2 5
38
3 8
08/08/2009
0 8 /0 8 / 2 00 9
08/08/2009
38
14:25
Face recognition frame