Pentax Optio WS80 - Framing Your Pictures (Frame Composite Mode)

93
3
Taking Pictures
4 Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
5 Press the shutter release button fully.
The picture is taken.
In N (Frame Composite) mode, you can take pictures using the frames
stored in the camera.
1 Press the four-way controller (3) in A mode.
The Capture Mode Palette appears.
2 Use the four-way controller (2345) to select N.
3 Press the 4 button.
The 9-frame display of the frame selection screen appears.
4 Use the four-way controller
(2345) to choose the frame you
want to use.
Framing Your Pictures (Frame Composite Mode)
Four-way controller
4 button
Zoom button
Shutter release
button
y
OK
O K
OK
OK