201
7
Settings
1
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
2
Use the four-way controller (23) to select [Folder
Name].
3
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller (23) to select [Standard]
or [Date].
5
Press the 4 button.
The setting is saved.
When you connect the camera to AV equipment, choose the appropriate
video output format (NTSC or PAL) for taking and playing back images.
1
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
2
Use the four-way controller (23) to select [Video Out].
3
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller (23)
to select a video output format.
Choose the video output format to match
the input format of the AV equipment.
Changing the Video Output Format
Setting
Power Saving
Auto Power Off
Reset
3min.
5sec.
Video Out
Brightness Level
2/3
MENU
Cancel
OK
OK
NTSC
PAL
USB Connection MSC
To Next Page
Loading...
