119
3
Taking Pictures
3
Use the four-way controller (45)
to select O or P.
O Blink Detection function works.
P Blink Detection function does not
work.
The setting is saved.
4
Press the 3 button.
The camera returns to capture status.
You can set this function to correct camera shake which occurs during
shooting. If you set Pixel Track SR, the camera automatically corrects
any camera shake in the images you shot. The default setting is P (Off).
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [Pixel Track
SR].
3
Use the four-way controller (45)
to select O or P.
O Corrects camera shake.
P Does not correct camera shake.
Blink Detection 1p.73
Setting Pixel Track SR
Use the Movie SR function (p.129) to correct camera shake in C
(Movie) and V (Underwater Movie) modes.
Rec. Mode
MENU
Exit
2/4
Movie
Interval Shoot
Blink Detection
Digital Zoom
EV Compensation
0.0
D-Range Setting
Rec. Mode
MENU
Exit
1/4
Recorded Pixels
Pixel Track SR
White Balance
AE Metering
Sensitivity
Focusing Area
10
M
AWB
Auto
To Next Page
Loading...
Need help?
General
