35
1
Getting Started
Powering the Camera
Use the supplied battery charger (D-BC88) to charge the supplied
rechargeable lithium-ion battery (D-LI88) before using it in the camera
for the first time or after a long period of non-use, or when the [Battery
depleted] message appears.
Note: AC plug cord “Listed, Type SPT-2 or NISPT-2, 18/2 flexible cord,
rated 125 V, 7A, minimum 6 ft (1.8 m)”
1
Connect the AC plug cord to the battery charger.
2
Plug the AC plug cord into the power outlet.
3
Place the battery in the battery charger so that the
PENTAX logo is facing up.
The charging indicator lights while the battery is charging and turns off
when charging is finished.
4
Remove the battery from the battery charger when
charging is finished.
Charging the Battery
3
1
2
Battery charger
Charging indicator
While charging: Lights
Charging finished: Turns off
Battery
AC plug cord
To power
outlet
To Next Page
Loading...
Need help?
General
