120
3
Taking Pictures
4
Press the 3 button.
The camera returns to capture status.
One of the following icons appears on the display.
Use this setting to specify whether or not an Instant Review is displayed
immediately after images are shot. The default setting is O (On).
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (
23
) to select [Instant Review].
3
Use the four-way controller (45)
to select O or P.
O Instant Review is displayed.
P Instant Review is not displayed.
M
When [Pixel Track SR] is set to O
f
When the shutter release button is pressed halfway with [Pixel Track
SR] set to P, and the shutter speed is slow or the flash mode is set to
a (Flash Off) (Camera shake warning).
When [Pixel Track SR] is set to O, camera shake is corrected after
shooting, and then the corrected image is saved.
The Pixel Track SR function does not work in the following situations:
- When C (Movie), V (Underwater Movie), X (Digital Wide),
C (Half-length Portrait), S (Fireworks), F (Digital Panorama) or
N (Frame Composite) mode is selected as the shooting mode
- When g (Self-timer), j (Continuous Shooting) or K (Burst
Shooting) is selected as the drive mode
- When the flash discharges
- When the sensitivity is set to 1600 or higher
- During Voice Recording
Setting the Instant Review
Rec. Mode
Saturation
MENU
Exit
3/4
Sharpness
Contrast
Green Button
Memory
Instant Review
To Next Page
Loading...
Need help?
General
