94
3
Taking Pictures
5
Press the zoom button towards the right (y).
The selected frame appears in single-image display.
You can choose another frame using either of the following operations.
6
Press the 4 button.
The framed image appears on the display.
When the camera recognizes a person’s
face, the Face Recognition function is
activated and the face recognition frame
appears (p.76).
7
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
8
Press the shutter release button fully.
The picture is taken.
Four-way controller (45) Press to choose a different frame.
Zoom button towards the
left (f)
Press to return to the 9-frame display of the
frame selection screen, and then perform Step 4
to choose a different frame.
• The number of recorded pixels is fixed at h (2048×1536).
• At shipment, the camera includes 3 default frames and 87 optional
frames built-in. (The CD-ROM supplied with the camera contains a
total of 90 frames, including the default frames.)
Optional Frames
The optional frames are stored in the built-in memory in the Optio WS80. These
optional frames are deleted if the files on the built-in memory are deleted with a
computer or the built-in memory is formatted. To reload the optional frames into
the built-in memory, copy the files from the CD-ROM (S-SW87) supplied with
the camera (p.173).
Adding a Frame to a captured image 1p.171
38
38
08/08/2009
08/08/2009
14:25
14:25
To Next Page
Loading...
Need help?
General
